If you want to make a WebLogic domain home configuration update to a running Model in Image domain, and you want the update to survive WebLogic Server pod restarts, then you must modify your existing model and instruct the WebLogic Kubernetes Operator to propagate the change.
If instead you make a direct runtime WebLogic configuration update of a Model in Image domain using the WebLogic Server Administration Console or WLST scripts, then the update will be ephemeral. This is because a Model in Image domain home is regenerated from the model on every pod restart.
There are two approaches for propagating model updates to a running Model in Image domain without first shutting down the domain:
Online updates: If model changes are configured to fully dynamic configuration MBean attributes,
then you can optionally propagate changes to WebLogic pods without a roll using an online update.
If an online update request includes non-dynamic model updates that can only be achieved
using an offline update,
then the resulting behavior is controlled by the domain resource YAML
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges attribute,
which is discussed in detail later in this document.
Offline updates: Offline updates are propagated to WebLogic pods by updating your model and then initiating a domain roll, which generates a new domain configuration, restarts the domain’s WebLogic Administration Server with the updated configuration, and then restarts the other pods in the cluster.
The operator does not support all types of WebLogic configuration changes while a domain is still running. If a change is unsupported for an online or offline update, then propagating the change requires entirely shutting domain the domain, applying the change, and finally restarting the domain. Full domain restarts are discussed in Full domain restarts. Supported and unsupported changes are discussed in Supported updates and Unsupported updates.
It is the administrator’s responsibility to make the necessary changes to a domain resource to initiate the correct approach for an update.
Custom configuration overrides, which are WebLogic configuration overrides
specified using a domain resource YAML file configuration.overridesConfigMap, as described in
Configuration overrides,
are not supported in combination with Model in Image.
Model in Image will generate an error if custom overrides are specified.
This should not be a concern because model file, secret, or model image updates are simpler
and more flexible than custom configuration override updates.
Unlike configuration overrides, the syntax for a model file update exactly matches
the syntax for specifying your model file originally.
The following updates are supported for offline or online updates, except when they reference an area that is specifically documented as unsupported below:
You can add a new WebLogic cluster or standalone server.
You can increase the size of a dynamic WebLogic cluster.
You can add new MBeans or resources by specifying their corresponding model YAML file snippet along with their parent bean hierarchy. For example, you can add a data source.
You can change or add MBean attributes by specifying a YAML file snippet
along with its parent bean hierarchy that references an existing MBean and the attribute.
For example, to add or alter the maximum capacity of a data source named mynewdatasource:
resources:
JDBCSystemResource:
mynewdatasource:
JdbcResource:
JDBCConnectionPoolParams:
MaxCapacity: 5
For more information, see Using Multiple Models in the WebLogic Deploy Tooling documentation.
You can change or add secrets that your model macros reference
(macros that use the @@SECRET:secretname:secretkey@@ syntax).
For example, you can change a database password secret.
For offline updates only, you can change or add environment variables
that your model macros reference
(macros that use the @@ENV:myenvvar@@ syntax).
You can remove an MBean, application deployment, or resource by omitting any
reference to it in your image model files and WDT config map.
You can also remove a named MBean, application deployment, or resource
by specifying an additional model file with an exclamation point (!)
just before its name plus ensuring the new model file is loaded after
the original model file that contains the original named configuration.
For example, if you have a data source named mynewdatasource defined
in your model, then it can be removed by specifying a small model file that
loads after the model file that defines the data source, where the
small model file looks like this:
resources:
JDBCSystemResource:
!mynewdatasource:
There are some exceptions for online updates.
For more information, see Declaring Named MBeans to Delete in the WebLogic Deploying Tooling documentation.
It is important to avoid applying unsupported model updates to a running domain. An attempt to use an unsupported update may not always result in a clear error message, and the expected behavior may be undefined. If you need to make an unsupported update and no workaround is documented, then shut down your domain entirely before making the change. See Full domain restarts.
The following summarizes the types of runtime update configuration that are not supported in this release of Model in Image unless a workaround or alternative is documented:
Enabled, listen address, protocol, or porttopology: stanza changesHere is a detailed description of each unsupported runtime update and a description of workarounds and alternatives when applicable:
There is no way to directly delete an attribute from an MBean that’s already been specified by a model file.
The workaround is to do this using two model files:
add a model file that deletes the named bean/resource that is a parent to
the attribute you want to delete using the ! syntax as described above,
and add another model file that will be loaded after the first one,
which fully defines the named bean/resource but without the attribute you want to delete.
There is no way to directly change the MBean name of an attribute.
Instead, you can remove a named MBean using the ! syntax as described
in Supported Updates, and then add a new one as a replacement.
You cannot change the domain name at runtime.
You have a limited ability to change an existing WebLogic cluster’s membership. Specifically, do not apply runtime updates for:
replicas attribute.replicas attribute.You cannot change, add, or remove network listen address, port, protocol, and enabled configuration for existing clusters or servers at runtime.
Specifically, do not apply runtime updates for:
Enabled, listen address, or port.Enabled, listen address, protocol, or port.Note that it is permitted to override network access point public or external addresses and ports.
External access to JMX (MBean) or online WLST requires that the network access point internal port
and external port match (external T3 or HTTP tunneling access to JMS, RMI, or EJBs don’t require port matching).
Due to security considerations, we strongly recommend that T3 or any RMI protocol should not be exposed outside the cluster.
Changing, adding, or removing server and domain log related settings in an MBean at runtime
when the domain resource is configured to override the same MBeans using the spec.logHome,
spec.logHomeEnabled, or spec.httpAccessLogInLogHome attributes.
Embedded LDAP security entries for users, groups, roles, and credential mappings. For example, you cannot add a user to the default security realm. Online update attempts in this area will fail during the introspector job, and offline update attempts may result in inconsistent security checks during the offline update’s rolling cycle. If you need to make these kinds of updates, then shut down your domain entirely before making the change, or switch to an external security provider.
Any Model YAML topology: stanza changes,
for example, ConsoleEnabled, RootDirectory, AdminServerName, and such.
For a complete list, run /u01/wdt/weblogic-deploy/bin/modelHelp.sh -oracle_home $ORACLE_HOME topology
(this assumes you have installed WDT in the /u01/wdt/weblogic-deploy directory).
Deleting Model entries by type. For example, you cannot delete an entire SelfTuning type stanza
by omitting the stanza in an online update or by specifying an additional model with !SelfTuning
in either an offline or an online update.
Instead, you can delete the specific MBean by omitting the MBean itself while leaving its SelfTuning
parent in place or by specifying an additional model using the ! syntax in combination
with the name of the specific MBean.
See online update handling of deletes for details.
Deleting multiple resources that have cross-references in combination with online updates. For example, concurrently deleting a persistent store and a data source referenced by the persistent store, For this type of failure, the introspection job will fail and log an error describing the failed reference, and the job will automatically retry up to its maximum retries. See online update handling of deletes for details.
Security related changes in combination with online updates.
Such changes included security changes in domainInfo.Admin*,
domainInfo.RCUDbinfo.*, topology.Security.*, and topology.SecurityConfiguration.*.
Any online update changes in these sections will result in a failure.
If you have verified your proposed model updates to a running Model in Image domain are supported by consulting Supported updates and Unsupported updates, then you can use the following approaches.
For online or offline updates:
Specify a new or changed WDT ConfigMap that contains model files
and use your domain resource YAML file configuration.model.configMap field to reference the map.
The model files in the ConfigMap will be merged with any model files in the image.
Ensure the ConfigMap is deployed to the same namespace as your domain.
Change, add, or delete secrets that are referenced by macros in your model files
and use your domain resource YAML file configuration.secrets field to reference the secrets.
Ensure the secrets are deployed to the same namespace as your domain.
For offline updates only, there are two additional options:
Supply a new image with new or changed model files.
spec.image,
then change this field to reference the image.serverPod.auxiliaryImages.image field
value to reference the new image or add a new serverPod.auxiliaryImages mount for
the new image.Change, add, or delete environment variables that are referenced by macros in your model files.
Environment variables are specified in the domain resource YAML file spec.serverPod.env
or spec.serverPod.adminServer.env attributes.
It is advisable to defer the last two modification options, or similar domain resource YAML file changes to fields that cause servers to be restarted, until all of your other modifications are ready. This is because such changes automatically and immediately result in a rerun of your introspector job, and, if the job succeeds, then a roll of the domain, plus, an offline update, if there are any accompanying model changes.
Model updates can include additions, changes, and deletions. For help generating model changes:
For a description of model file syntax, see the WebLogic Deploy Tool documentation and Model in Image Model files documentation.
For a description of helper tooling that you can use to generate model change YAML, see Using the WDT Discover and Compare Model Tools.
If you specify multiple model files in your image, volumes (including those based on images from the auxiliary images feature), or WDT ConfigMap, then the order in which they’re loaded and merged is determined as described in Model file naming and loading order.
If you are performing an online update and the update includes deletes, then see Online update handling of deletes.
After your model updates are prepared, you can instruct the operator to propagate the changed model to a running domain by following the steps in Offline updates or Online updates.
Use the following steps to initiate an offline configuration update to your model:
spec.image,
then change this field to reference the image.serverPod.auxiliaryImages.image field
value to reference the new image or add a new serverPod.auxiliaryImages mount for
the new image.domain.spec.serverPod.env
or domain.spec.adminServer.serverPod.env accordingly.domain.spec.configuration.model.configMap
to the name of the ConfigMap.domain.spec.configuration.secrets array reflects all current secrets.spec.restartVersion
or change any of the other
Domain resource YAML fields that cause servers to be restarted.The operator will subsequently rerun the domain’s introspector job. This job will reload all of your secrets and environment variables, merge all of your model files, and generate a new domain home.
If the job succeeds, then the operator will make the updated domain home available to pods
using a ConfigMap named DOMAIN_UID-weblogic-domain-introspect-cm and the operator will
subsequently roll (restart) each running WebLogic Server pod in the domain
so that it can load the new configuration.
A domain roll begins by restarting the domain’s Administration Server and
then proceeds to restart each Managed Server in the domain.
If the job reports a failure, see Debugging for advice.
For an offline update sample which adds a data source, see the Update 1 use case in the Model in Image sample.
Use the following steps to initiate an online configuration update to your model:
Do not change domain.spec.image, domain.spec.serverPod.env, or any other domain resource YAML
fields that cause servers to be restarted;
this will automatically and immediately result in a rerun of your introspector job,
a roll if the job succeeds, plus an offline update if there are any accompanying model changes.
If you are specifying a WDT ConfigMap, then set domain.spec.configuration.model.configMap
to the name of the ConfigMap.
If you are adding or deleting secrets as part of your change, then ensure the
domain.spec.configuration.secrets array reflects all current secrets.
Set domain.spec.configuration.model.onlineUpdate.enabled to true (default is false).
Set domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges to one of
CommitUpdateOnly (default), and CommitUpdateAndRoll.
For details, see
online update handling of non-dynamic WebLogic configuration changes.
Optionally, tune the WDT timeouts in domain.spec.configuration.model.onlineUpdate.wdtTimeouts.
kubectl explain domain.spec.configuration.model.onlineUpdate.wdtTimeouts.Change domain.spec.introspectVersion to a different value. For examples, see
change the domain spec.introspectVersion.
After you’ve completed these steps, the operator will subsequently run an introspector Job which generates a new merged model, compares the new merged model to the previously deployed merged model, and runs the WebLogic Deploy Tool to process the differences:
If the introspector job WDT determines that the differences are confined to fully dynamic WebLogic configuration MBean changes, then the operator will send delta online updates to the running WebLogic pods.
If WDT detects non-dynamic WebLogic configuration MBean changes, then the operator may ignore the updates,
honor only the online updates, or initiate an offline update (roll) depending on whether you have configured
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges to CommitUpdateOnly (default), or
CommitUpdateAndRoll.
For details, see
online update handling of non-dynamic WebLogic configuration changes.
If the introspector job reports a failure or any other failure occurs, then see Debugging for advice. When recovering from a failure, please keep the following points in mind:
The operator cannot automatically revert changes to resources that are under user control (just like with offline updates). For example, it is the administrator’s responsibility to revert problem changes to an image, configMap, secrets, and domain resource YAML file.
If there is any failure during an online update, then no WebLogic configuration changes
are made to the running domain and the introspector job retries up to a maximum number of times.
To correct the problem, modify and reapply your model resources (ConfigMap and/or secrets),
plus, if the introspector job has stopped retrying, you must also change your domain resource
domain.spec.introspectVersion again.
Sample domain resource YAML file for an online update:
...
kind: Domain
metadata:
name: sample-domain1
namespace: sample-domain1-ns
...
spec:
...
introspectVersion: 5
configuration:
...
model:
domainType: "WLS"
configMap: sample-domain1-wdt-config-map
runtimeEncryptionSecret: sample-domain1-runtime-encryption-secret
onlineUpdate:
enabled: true
onNonDynamicChanges: "CommitUpdateAndRoll"
secrets:
- sample-domain1-datasource-secret
- sample-domain1-another-secret
The domain resource YAML domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges attribute
controls behavior when
non-dynamic WebLogic configuration changes are detected during an online update introspector job.
Non-dynamic changes are changes that require a domain restart to take effect.
Valid values are CommitUpdateOnly (default), or CommitUpdateAndRoll:
If set to CommitUpdateOnly (the default) and any non-dynamic changes are detected,
then all changes will be committed,
dynamic changes will take effect immediately,
the domain will not automatically restart (roll),
and any non-dynamic changes will become effective on a pod only when
the pod is later restarted.
If set to CommitUpdateAndRoll and any non-dynamic changes are detected,
then all changes will be committed, dynamic changes will take effect immediately,
the domain will automatically restart (roll),
and non-dynamic changes will take effect on each pod after the pod restarts.
When updating a domain with non-dynamic MBean changes with
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges=CommitUpdateOnly (the default),
the non-dynamic changes are not effective on a WebLogic pod until the pod is restarted.
However, if you scale up a cluster or otherwise start any new servers in the domain,
then the new servers will start with the new non-dynamic changes
and the domain will then be running in an inconsistent state until its older servers are restarted.
The primary use case for online updates is to make small additions, deletions of single resources or MBeans that have no dependencies, or changes to non-dynamic MBean attributes.
Deletion can be problematic for online updates in two cases:
In general, complex deletion should be handled by offline updates to avoid these problems.
Note: Implicitly removing a model’s parent type
section may sometimes work depending
on the type of the section. For example, if you have an application
in the model under appDeployments: in a model.configMap and you
subsequently update the ConfigMap using an online update so that it
no longer includes the appDeployment section, then the online update
will delete the application from the domain.
MBean type section deletion
For an example of an MBean deletion, consider a WDT ConfigMap that starts with:
resources:
SelfTuning:
WorkManager:
wm1:
Target: 'cluster-1'
wm2:
Target: 'cluster-1'
JDBCSystemResource:
...
If you want to online update to a new model without work-managers,
then change the ConfigMap to the following:
resources:
SelfTuning:
WorkManager:
JDBCSystemResource:
...
or supply an additional ConfigMap:
resources:
SelfTuning:
WorkManager:
'!wm1':
'!wm2':
The online update will fail if you try replace the ConfigMap
with the SelfTuning section omitted:
resources:
JDBCSystemResource:
...
The above will fail as this implicitly removes
the MBean types SelfTuning and WorkManager.
Deleting cross-referenced MBeans
For an example of an unsupported online update delete of MBeans with cross references, consider the case of a Work Manager configured with constraints where you want to delete the entire Work Manager:
resources:
SelfTuning:
WorkManager:
newWM:
Target: 'cluster-1'
MinThreadsConstraint: 'SampleMinThreads'
MaxThreadsConstraint: 'SampleMaxThreads'
MinThreadsConstraint:
SampleMinThreads:
Count: 1
MaxThreadsConstraint:
SampleMaxThreads:
Count: 10
If you try to specify the updated model in the ConfigMap as:
resources:
SelfTuning:
WorkManager:
MinThreadsConstraint:
MaxThreadsConstraint:
Then, the operator will try use this delta to online update the domain:
resources:
SelfTuning:
MaxThreadsConstraint:
'!SampleMaxThreads':
WorkManager:
'!newWM':
MinThreadsConstraint:
'!SampleMinThreads':
This can fail because an online update might not delete all the referenced Constraints first
before deleting the WorkManager.
To work around problems with online updates to objects with cross dependencies, you can use a series of online updates to make the change in stages. For example, continuing the previous Work Manager example, first perform an online update to omit the Work Manager but not the constraints:
resources:
SelfTuning:
WorkManager:
MinThreadsConstraint:
SampleMinThreads:
Count: 1
MaxThreadsConstraint:
SampleMaxThreads:
Count: 10
After that update completes, then perform another online update:
resources:
SelfTuning:
WorkManager:
MinThreadsConstraint:
MaxThreadsConstraint:
During an online update, the operator will rerun the introspector job, which in turn attempts online WebLogic configuration changes to the running domain. You can monitor an update’s status using its domain resource’s status conditions and its WebLogic Server pod labels.
For example, for the domain status
you can check the domain resource domain.status stanza
using kubectl -n MY_NAMESPACE get domain MY_DOMAINUID -o yaml,
and for the WebLogic pod labels you can use
kubectl -n MY_NAMESPACE get pods --show-labels plus
optionally add --watch to watch the pods as they change over time.
Here is how to interpret each domain resource’s domain.status.conditions type:
The Progressing type.
The Available type.
domain.status section:
status:
clusters:
- clusterName: cluster-1
maximumReplicas: 5
minimumReplicas: 0
readyReplicas: 2
replicas: 2
replicasGoal: 2
conditions:
- lastTransitionTime: "2021-01-26T18:43:14.377Z"
reason: ServersReady
status: "True"
type: Available
The Failed type.
message attribute will display an error message.Failed condition’s status is not set to True if the
domain resource is successfully processed but one or more WebLogic Server
pods is failing to start. In this case, Kubernetes will periodically
try and restart the pod(s), and the Available type
may remain True.The ConfigChangesPendingRestart type.
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateOnly.domain.spec.configuration.model.onlineUpdate.enabled is True.Status:
...
Conditions:
Last Transition Time: 2021-01-20T15:09:15.209Z
Message: Online update completed successfully, but the changes require restart and the domain resource specified 'spec.configuration.model.onlineUpdate.onNonDynamicChanges=CommitUpdateOnly' or not set. The changes are committed but the domain require manually restart to make the changes effective. The changes are: Server re-start is REQUIRED for the set of changes in progress.
The following non-dynamic attribute(s) have been changed on MBeans
that require server re-start:
MBean Changed : com.bea:Name=oracle.jdbc.fanEnabled,Type=weblogic.j2ee.descriptor.wl.JDBCPropertyBean,Parent=[sample-domain1]/JDBCSystemResources[Bubba-DS],Path=JDBCResource[Bubba-DS]/JDBCDriverParams/Properties/Properties[oracle.jdbc.fanEnabled]
Attributes changed : Value
Reason: Online update applied, introspectVersion updated to 82
Status: True
Type: ConfigChangesPendingRestart
Here are some of the expected WebLogic pod labels after an online update success:
Each WebLogic Server pod’s weblogic.introspectVersion label value
will eventually match the domain.spec.introspectVersion value that you defined.
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateOnly (the default),
then the introspect version label on all pods is immediately updated
after the introspect job successfully completes.domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateAndRoll
and there are no non-dynamic configuration changes to the model,
then the introspect version label on all pods is immediately updated
after the introspect job successfully completes.domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateAndRoll
and there are non-dynamic clabel onfiguration changes to the model,
then the introspect version label on each pod is updated after the pod is rolled.There will be a weblogic.configChangesPendingRestart=true label on each
WebLogic Server pod until the pod is restarted (rolled) by an administrator
if all of the following are true:
domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges
attribute is CommitUpdateOnly (the default).Successful online update that includes only dynamic WebLogic MBean changes.
Available condition status is set to True.weblogic.introspectVersion label on all pods will be set to match the domain.spec.introspectVersion.Successful online update that includes non-dynamic WebLogic MBean attribute changes when domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateOnly (the default).
username).Available condition will have a Status of True.ConfigChangesPendingRestart condition will have a Status of True until an administrator subsequently rolls all WebLogic Server pods that are already running.weblogic.introspectVersion label will match domain.spec.introspectVersion.weblogic.configChangesPendingRestart=true label until an administrator subsequently rolls the pod.weblogic.configChangesPendingRestart=true label (such as by initiating a domain roll).Successful online update that includes non-dynamic WebLogic MBean attribute changes when domain.spec.configuration.model.onlineUpdate.onNonDynamicChanges is CommitUpdateAndRoll.
weblogic.introspectVersion label will match domain.spec.introspectVersion after it is rolled.Available condition will have a Status of True after the roll completes.Changing any of the domain resource fields that cause servers to be restarted in addition to domain.spec.introspectVersion, spec.configuration.secrets, spec.configuration.model.onlineUpdate, or spec.configuration.model.configMap.
Changing any model attribute that is unsupported.
Errors in the model; for example, a syntax error.
Failed condition will have a Status of True.spec.introspectVersion.Other errors while updating the domain.
Failed condition will have a Status of True.spec.introspectVersion.For an online update sample which alters a data source and Work Manager, see the Update 4 use case in the Model in Image sample.
Optionally, you can use the WDT Discover Domain and Compare Domain Tools to help generate your model file updates. The WebLogic Deploy Tooling Discover Domain Tool generates model files from an existing domain home, and its Compare Model Tool compares two domain models and generates the YAML file for updating the first domain to the second domain.
For example, assuming you’ve installed WDT in /u01/wdt/weblogic-deploy and assuming your domain type is WLS:
# (1) Run discover for your existing domain home.
$ /u01/wdt/weblogic-deploy/bin/discoverDomain.sh \
-oracle_home $ORACLE_HOME \
-domain_home $DOMAIN_HOME \
-domain_type WLS \
-archive_file old.zip \
-model_file old.yaml \
-variable_file old.properties
# (2) Now make some WebLogic config changes using the console or WLST.
# (3) Run discover for your changed domain home.
$ /u01/wdt/weblogic-deploy/bin/discoverDomain.sh \
-oracle_home $ORACLE_HOME \
-domain_home $DOMAIN_HOME \
-domain_type WLS \
-archive_file new.zip \
-model_file new.yaml \
-variable_file new.properties
# (4) Compare your old and new yaml using diff
$ diff new.yaml old.yaml
# (5) Compare your old and new yaml using compareDomain to generate
# the YAML update file you can use for transforming the old to new.
# /u01/wdt/weblogic-deploy/bin/compareModel.sh \
-oracle_home $ORACLE_HOME \
-output_dir /tmp \
-variable_file old.properties \
old.yaml \
new.yaml
# (6) The compareModel will generate these files:
# /tmp/diffed_model.json
# /tmp/diffed_model.yaml, and
# /tmp/compare_model_stdout
NOTE: If your domain type isn’t WLS, remember to change the domain type to JRF or RestrictedJRF in the above discoverDomain.sh commands.
restartVersion or introspectVersionAs was mentioned in the offline updates section, one way to tell the operator to
apply offline configuration changes to a running domain is by altering the Domain
spec.restartVersion. Similarly, an online update is initiated by altering
the Domain spec.introspectVersion. Here are some common ways to alter either of these fields:
You can alter restartVersion or introspectVersion interactively using kubectl edit -n MY_NAMESPACE domain MY_DOMAINUID.
If you have your domain’s resource file, then you can alter this file and call kubectl apply -f on the file.
You can use the Kubernetes get and patch commands.
Here’s a sample automation script for restartVersion
that takes a namespace as the first parameter (default sample-domain1-ns)
and a domainUID as the second parameter (default sample-domain1):
#!/bin/bash
NAMESPACE=${1:-sample-domain1-ns}
DOMAINUID=${2:-sample-domain1}
currentRV=$(kubectl -n ${NAMESPACE} get domain ${DOMAINUID} -o=jsonpath='{.spec.restartVersion}')
if [ $? = 0 ]; then
# we enter here only if the previous command succeeded
nextRV=$((currentRV + 1))
echo "@@ Info: Rolling domain '${DOMAINUID}' in namespace '${NAMESPACE}' from restartVersion='${currentRV}' to restartVersion='${nextRV}'."
kubectl -n ${NAMESPACE} patch domain ${DOMAINUID} --type='json' \
-p='[{"op": "replace", "path": "/spec/restartVersion", "value": "'${nextRV}'" }]'
fi
Here’s a similar sample script for introspectVersion:
#!/bin/bash
NAMESPACE=${1:-sample-domain1-ns}
DOMAINUID=${2:-sample-domain1}
currentIV=$(kubectl -n ${NAMESPACE} get domain ${DOMAINUID} -o=jsonpath='{.spec.introspectVersion}')
if [ $? = 0 ]; then
# we enter here only if the previous command succeeded
nextIV=$((currentIV + 1))
echo "@@ Info: Rolling domain '${DOMAINUID}' in namespace '${NAMESPACE}' from introspectVersion='${currentIV}' to introspectVersion='${nextIV}'."
kubectl -n ${NAMESPACE} patch domain ${DOMAINUID} --type='json' \
-p='[{"op": "replace", "path": "/spec/introspectVersion", "value": "'${nextIV}'" }]'
fi
You can use a WebLogic Kubernetes Operator sample script that invokes the same commands that are described in the previous bulleted item.
patch-restart-version.sh and patch-introspect-version.sh in
the kubernetes/samples/scripts/create-weblogic-domain/model-in-image/utils/
directory.introspectDomain.sh and rollDomain.sh among
the Domain lifecycle sample scripts.