Manage FMW Infrastructure domains

Contents

The operator supports FMW Infrastructure domains, that is, domains that are created with the FMW Infrastructure installer rather than the WebLogic Server installer. These domains contain Java Required Files (JRF), which are a prerequisite for “upper stack” products like Oracle SOA Suite, for example. These domains also require a database and the use of the Repository Creation Utility (RCU).

This document provides details about the special considerations for running FMW Infrastructure domains with the operator. Other than those considerations listed here, FMW Infrastructure domains work in the same way as WebLogic Server domains. The remainder of the documentation in this site applies equally to FMW Infrastructure domains and WebLogic Server domains.

NOTE: FMW Infrastructure domains are supported using the Domain on PV domain home source type only.

For more information about the deployment of Oracle Fusion Middleware products on Kubernetes, see https://oracle.github.io/fmw-kubernetes/ .

Limitations

Compared to running a WebLogic Server domain in Kubernetes using the operator, the following limitations currently exist for FMW Infrastructure domains:

• The WebLogic Monitoring Exporter currently supports the WebLogic MBean trees only. Support for JRF MBeans has not been added yet.
• Only configured clusters are supported. Dynamic clusters are not supported for FMW Infrastructure domains. Note that you can still use all of the scaling features, you just need to define the maximum size of your cluster at domain creation time.
• FMW Infrastructure domains are not supported with any version of the operator before version 2.2.0.
• FMW Infrastructure domains are not supported using the Model in Image or Domain in Image domain home source types .

Obtaining the FMW Infrastructure image

The WebLogic Kubernetes Operator requires patch 29135930. The standard pre-built FMW Infrastructure General Availability image, container-registry.oracle.com/middleware/fmw-infrastructure:12.2.1.3, already has this patch applied. The FMW Infrastructure 12.2.1.4.0 images do not require this patch. For detailed instructions on how to log in to the Oracle Container Registry and accept license agreement, see this document .

NOTE: As of December, 2022, Fusion Middleware 12.2.1.3 is no longer supported. The last Critical Patch Updates (CPU) images for FMW Infrastructure 12.2.1.3 were published in October, 2022. As of June, 2023, Oracle WebLogic Server 12.2.1.3 is no longer supported. The last CPU images for WebLogic Server 12.2.1.3 were published in April, 2023.

To pull an image from the Oracle Container Registry, in a web browser, navigate to https://container-registry.oracle.com and log in using the Oracle Single Sign-On authentication service. If you do not already have SSO credentials, at the top of the page, click the Sign In link to create them.

Use the web interface to accept the Oracle Standard Terms and Restrictions for the Oracle software images that you intend to deploy. Your acceptance of these terms is stored in a database that links the software images to your Oracle Single Sign-On login credentials.

First, you will need to log in to the Oracle Container Registry:

$ docker login container-registry.oracle.com

Then, you can pull the image with this command:

$ docker pull container-registry.oracle.com/middleware/fmw-infrastructure:14.1.2.0-jdk17-ol8

If desired, you can:

• Check the WLS version with docker run container-registry.oracle.com/middleware/fmw-infrastructure:14.1.2.0-jdk17-ol8 sh -c 'source $ORACLE_HOME/wlserver/server/bin/setWLSEnv.sh > /dev/null 2>&1 && java weblogic.version'

• Check the WLS patches with docker run container-registry.oracle.com/middleware/fmw-infrastructure:14.1.2.0-jdk17-ol8 sh -c '$ORACLE_HOME/OPatch/opatch lspatches'

Additional information about using this image is available in the Oracle Container Registry .

Creating an FMW Infrastructure image

You can also create an image containing the FMW Infrastructure binaries. We provide a sample in the Oracle GitHub account that demonstrates how to create an image to run the FMW Infrastructure. Please consult the README file associated with this sample for important prerequisite steps, such as building or pulling the Server JRE image and downloading the Fusion Middleware Infrastructure installer binary.

After cloning the repository and downloading the installer from Oracle Technology Network or e-delivery, you create your image by running the provided script:

$ cd docker-images/OracleFMWInfrastructure/dockerfiles

$ ./buildDockerImage.sh -v 12.2.1.4 -s

The image produced will be named oracle/fmw-infrastructure:12.2.1.4.

You must also install the required patch to use this image with the operator. We provide a sample that demonstrates how to create an image with the necessary patch installed.

After downloading the patch from My Oracle Support, you create the patched image by running the provided script:

$ cd docker-images/OracleFMWInfrastructure/samples/12213-patch-fmw-for-k8s

$ ./build.sh

This will produce an image named oracle/fmw-infrastructure:12213-update-k8s.

All samples and instructions reference the pre-built image, container-registry.oracle.com/middleware/fmw_infrastructure:12.2.1.4. Because these samples build an image based on WebLogic Server 12.2.1.3 and use the tag, oracle/fmw-infrastructure:12213-update-k8s, be sure to update your sample inputs to use this image value.

These samples allow you to create an image containing the FMW Infrastructure binaries and the necessary patch. You can use this image to run the Repository Creation Utility and to run your domain using the “domain on a persistent volume” model. If you want to use the “domain in an image” model, you will need to go one step further and add another layer with your domain in it. You can use WLST or WDT to create your domain.

Before creating a domain, you will need to set up the necessary schemas in your database.

Configuring access to your database

FMW Infrastructure domains require a database with the necessary schemas installed in them. We provide a utility, called the Repository Creation Utility (RCU), which allows you to create those schemas. You must set up the database before you create your domain. There are no additional requirements added by running FMW Infrastructure in Kubernetes; the same existing requirements apply.

For testing and development, you may choose to run your database inside Kubernetes or outside of Kubernetes.

Running the database inside Kubernetes

If you wish to run the database inside Kubernetes, you can use the official container image from the Oracle Container Registry . Please note that there is a Slim Variant (12.2.0.1-slim tag) of EE that has reduced disk space (4GB) requirements and a quicker container startup.

Running the database inside the Kubernetes cluster is possibly more relevant or desirable in test/development or CI/CD scenarios.

Here is an example of a Kubernetes YAML file to define a deployment of the Oracle database:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: oracle-db
  namespace: default
spec:
  replicas: 1
  selector:
    matchLabels:
      app.kubernetes.io/instance: dev
      app.kubernetes.io/name: oracle-db
  strategy:
    rollingUpdate:
      maxSurge: 1
      maxUnavailable: 1
    type: RollingUpdate
  template:
    metadata:
      creationTimestamp: null
      labels:
        app.kubernetes.io/instance: dev
        app.kubernetes.io/name: oracle-db
    spec:
      containers:
      - env:
        - name: DB_SID
          value: devcdb
        - name: DB_PDB
          value: devpdb
        - name: DB_DOMAIN
          value: k8s
        image: container-registry.oracle.com/database/enterprise:12.2.0.1-slim
        imagePullPolicy: IfNotPresent
        name: oracle-db
        ports:
        - containerPort: 1521
          name: tns
          protocol: TCP
        resources:
          limits:
            cpu: "1"
            memory: 2Gi
          requests:
            cpu: 200m
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
      dnsPolicy: ClusterFirst
      restartPolicy: Always
      schedulerName: default-scheduler
      securityContext: {}
      terminationGracePeriodSeconds: 30

Notice that you can pass in environment variables to set the SID, the name of the PDB, and so on. The documentation describes the other variables that are available.
Follow the instructions in the documentation to set the sys password.

You should also create a service to make the database available within the Kubernetes cluster with a well known name. Here is an example:

apiVersion: v1
kind: Service
metadata:
  name: oracle-db
  namespace: default
spec:
  ports:
  - name: tns
    port: 1521
    protocol: TCP
    targetPort: 1521
  selector:
    app.kubernetes.io/instance: dev
    app.kubernetes.io/name: oracle-db
  sessionAffinity: None
  type: ClusterIP

In the previous example, the database would be visible in the cluster using the address oracle-db.default.svc.cluster.local:1521/devpdb.k8s.

When you run the database in the Kubernetes cluster, you will probably want to also run RCU from a pod inside your network, though this is not strictly necessary. You could create a NodePort to expose your database outside the Kubernetes cluster and run RCU on another machine with access to the cluster.

Running the database outside Kubernetes

If you wish to run the database outside Kubernetes, you need to create a way for containers running in pods in Kubernetes to see the database. This can be done by defining a Kubernetes Service with no selector and associating it with an endpoint definition, as shown in the following example:

kind: Service
apiVersion: v1
metadata:
 name: database
spec:
 type: ClusterIP
 ports:
 - port: 1521
   targetPort: 1521
---
kind: Endpoints
apiVersion: v1
metadata:
 name: database
subsets:
 - addresses:
     - ip: 129.123.1.4
   ports:
     - port: 1521

This creates a DNS name database in the current namespace, ordefault if no namespace is specified, as in the previous example. In this example, the fully qualified name would be database.default.svc.cluster.local. The second part is the namespace. If you looked up the ClusterIP for such a service, it would have an IP address on the overlay network, that is the network inside the Kubernetes cluster. If you are using flannel, for example, the address might be something like 10.0.1.25. Note that this is usually a non-routed address.

From a container in a pod running in Kubernetes, you can make a connection to that address and port 1521. Kubernetes will route the connection to the address provided in the endpoint definition, in this example, 129.123.1.4:1521. This IP address (or name) is resolved from the point of view of the Kubernetes Node’s IP stack, not the overlay network inside the Kubernetes cluster. Note that this is a “real” routed IP address.

When you create your data sources, you would use the internal address, for example, database:1521/some.service.

Because your database is externally accessible, you can run RCU in the normal way, from any machine on your network.

Running the Repository Creation Utility to set up your database schema

If you want to run RCU from a pod inside the Kubernetes cluster, you can use the container image that you built earlier as a “service” pod to run RCU. To do this, start up a pod using that image as follows:

$ kubectl run rcu --generator=run-pod/v1 --image container-registry.oracle.com/middleware/fmw_infrastructure:12.2.1.4 -- sleep infinity

This will create a Kubernetes Deployment called rcu containing a pod running a container created from the container-registry.oracle.com/middleware/fmw_infrastructure:12.2.1.4 image which will just run sleep infinity, which essentially creates a pod that we can “exec” into and use to run whatever commands we need to run.

To get inside this container and run commands, use this command:

$ kubectl exec -ti rcu /bin/bash

When you are finished with this pod, you can remove it with this command:

$ kubectl delete pod rcu

Creating schemas

Inside this pod, you can use the following command to run RCU in command-line (no GUI) mode to create your FMW schemas. You will need to provide the right prefix and connect string. You will be prompted to enter the password for the sys user, and then the password to use for the regular schema users:

$ /u01/oracle/oracle_common/bin/rcu \
  -silent \
  -createRepository \
  -databaseType ORACLE \
  -connectString oracle-db.default:1521/devpdb.k8s \
  -dbUser sys \
  -dbRole sysdba \
  -useSamePasswordForAllSchemaUsers true \
  -selectDependentsForComponents true \
  -schemaPrefix FMW1 \
  -component MDS \
  -component IAU \
  -component IAU_APPEND \
  -component IAU_VIEWER \
  -component OPSS  \
  -component WLS  \
  -component STB

You need to make sure that you maintain the association between the database schemas and the matching domain just like you did in a non-Kubernetes environment. There is no specific functionality provided to help with this. We recommend that you consider making the RCU prefix (value of the schemaPrefix argument) the same as your domainUID to help maintain this association.

Dropping schemas

If you want to drop the schema, you can use a command like this:

$ /u01/oracle/oracle_common/bin/rcu \
  -silent \
  -dropRepository \
  -databaseType ORACLE \
  -connectString oracle-db.default:1521/devpdb.k8s \
  -dbUser sys \
  -dbRole sysdba \
  -selectDependentsForComponents true \
  -schemaPrefix FMW1 \
  -component MDS \
  -component IAU \
  -component IAU_APPEND \
  -component IAU_VIEWER \
  -component OPSS \
  -component WLS \
  -component STB

Again, you will need to set the right prefix and connection string, and you will be prompted to enter the sys user password.

Create a Kubernetes Secret with the RCU credentials

You also need to create a Kubernetes Secret containing the credentials for the database schemas. When you create your domain using the following sample, it will obtain the RCU credentials from this secret.

We provide a sample that demonstrates how to create the secret. The schema owner user name required will be the schemaPrefix value followed by an underscore and a component name, such as FMW1_STB. The schema owner password will be the password you provided for regular schema users during RCU creation.

Creating an FMW Infrastructure domain

Now that you have your images and you have created your RCU schemas, you are ready to create your domain.

Patching the FMW Infrastructure image

There are two kinds of patches that can be applied to the FMW Infrastructure binaries:

• Patches which are eligible for Zero Downtime Patching (ZDP), meaning that they can be applied with a rolling restart.
• Non-ZDP eligible compliant patches, meaning that the domain must be shut down and restarted.

You can find out whether or not a patch is eligible for Zero Downtime Patching by consulting the README file that accompanies the patch.

If you wish to apply a ZDP compliant patch which can be applied with a rolling restart, after you have patched the FMW Infrastructure image as shown in this sample , you can edit the domain custom resource with the name of the new image and the operator will initiate a rolling restart of the domain.

If you wish to apply a non-ZDP compliant patch to the FMW Infrastructure binary image, you must shut down the entire domain before applying the patch. Please see the documentation on domain lifecycle operations for more information.

An example of a non-ZDP compliant patch is one that includes a schema change that can not be applied dynamically.

Additional considerations for Coherence

If you are running a domain which contains Coherence, please refer to Coherence requirements for more information.