Apache webtier
This section provides information about how to install and configure Apache webtier to load balance Oracle SOA Suite domain clusters. You can configure Apache webtier for non-SSL and SSL termination access of the application URL.
Follow these steps to set up Apache webtier as a load balancer for an Oracle SOA Suite domain in a Kubernetes cluster:
- Build the Apache webtier image
- Create the Apache plugin configuration file
- Prepare the certificate and private key
- Install the Apache webtier Helm chart
- Verify domain application URL access
- Uninstall Apache webtier
Build the Apache webtier image
Refer to the sample, to build the Apache webtier Docker image.
Create the Apache plugin configuration file
-
The configuration file named custom_mod_wl_apache.conf should have all the URL routing rules for the Oracle SOA Suite applications deployed in the domain that needs to be accessible externally. Update this file with values based on your environment. The file content is similar to below. This directory location of this configuration file is referred as host-config-dir in input.yaml.
Click here to see the sample content of the configuration file custom_mod_wl_apache.conf for soa domain
# Copyright (c) 2020 Oracle and/or its affiliates.
#
# Licensed under the Universal Permissive License v 1.0 as shown at https://oss.oracle.com/licenses/upl.
#
<IfModule mod_weblogic.c>
WebLogicHost <WEBLOGIC_HOST>
WebLogicPort 7001
</IfModule>
# Directive for weblogic admin Console deployed on WebLogic Admin Server
<Location /console>
SetHandler weblogic-handler
WebLogicHost soainfra-adminserver
WebLogicPort 7001
</Location>
<Location /em>
SetHandler weblogic-handler
WebLogicHost soainfra-adminserver
WebLogicPort 7001
</Location>
<Location /servicebus>
SetHandler weblogic-handler
WebLogicHost soainfra-adminserver
WebLogicPort 7001
</Location>
<Location /lwpfconsole>
SetHandler weblogic-handler
WebLogicHost soainfra-adminserver
WebLogicPort 7001
</Location>
<Location /weblogic/ready>
SetHandler weblogic-handler
WebLogicHost soainfra-adminserver
WebLogicPort 7001
</Location>
# Directive for all application deployed on weblogic cluster with a prepath defined by LOCATION variable
# For example, if the LOCAITON is set to '/weblogic', all applications deployed on the cluster can be accessed via
# http://myhost:myport/weblogic/application_end_url
# where 'myhost' is the IP of the machine that runs the Apache web tier, and
# 'myport' is the port that the Apache web tier is publicly exposed to.
# Note that LOCATION cannot be set to '/' unless this is the only Location module configured.
<Location /soa-infra>
WLSRequest On
WebLogicCluster soainfra-cluster-soa-cluster:8001
PathTrim /weblogic1
</Location>
<Location /soa/composer>
WLSRequest On
WebLogicCluster soainfra-cluster-soa-cluster:8001
PathTrim /weblogic1
</Location>
<Location /integration/worklistapp>
WLSRequest On
WebLogicCluster soainfra-cluster-soa-cluster:8001
PathTrim /weblogic1
</Location>
<Location /ess>
WLSRequest On
WebLogicCluster soainfra-cluster-soa-cluster:8001
PathTrim /weblogic1
</Location>
<Location /EssHealthCheck>
WLSRequest On
WebLogicCluster soainfra-cluster-soa-cluster:8001
PathTrim /weblogic1
</Location>
# Directive for all application deployed on weblogic cluster with a prepath defined by LOCATION2 variable
# For example, if the LOCAITON2 is set to '/weblogic2', all applications deployed on the cluster can be accessed via
# http://myhost:myport/weblogic2/application_end_url
# where 'myhost' is the IP of the machine that runs the Apache web tier, and
# 'myport' is the port that the Apache webt ier is publicly exposed to.
#<Location /weblogic2>
#WLSRequest On
#WebLogicCluster domain2-cluster-cluster-1:8021
#PathTrim /weblogic2
#</Location>
-
Update volume path with the directory location of the file custom_mod_wl_apache.conf in file kubernetes/samples/charts/apache-samples/custom-sample/input.yaml
Prepare the certificate and private key
-
(For the SSL termination configuration only) Run the following commands to generate your own certificate and private key using openssl.
$ cd ${WORKDIR}/weblogic-kubernetes-operator
$ cd kubernetes/samples/charts/apache-samples/custom-sample
$ export VIRTUAL_HOST_NAME=WEBLOGIC_HOST
$ export SSL_CERT_FILE=WEBLOGIC_HOST.crt
$ export SSL_CERT_KEY_FILE=WEBLOGIC_HOST.key
$ sh certgen.sh
NOTE: Replace WEBLOGIC_HOST with the host name on which Apache webtier is to be installed.
Click here to see the output of the certifcate generation
$ls
certgen.sh custom_mod_wl_apache.conf custom_mod_wl_apache.conf_orig input.yaml README.md
$ sh certgen.sh
Generating certs for WEBLOGIC_HOST
Generating a 2048 bit RSA private key
........................+++
.......................................................................+++
unable to write 'random state'
writing new private key to 'apache-sample.key'
-----
$ ls
certgen.sh custom_mod_wl_apache.conf_orig WEBLOGIC_HOST.info
config.txt input.yaml WEBLOGIC_HOST.key
custom_mod_wl_apache.conf WEBLOGIC_HOST.crt README.md
-
Prepare input values for the Apache webtier Helm chart.
Run the following commands to prepare the input value file for the Apache webtier Helm chart.
$ base64 -i ${SSL_CERT_FILE} | tr -d '\n'
$ base64 -i ${SSL_CERT_KEY_FILE} | tr -d '\n'
$ touch input.yaml
Update virtualHostName with the value of the WEBLOGIC_HOST in file kubernetes/samples/charts/apache-samples/custom-sample/input.yaml
Click here to see the snapshot of the sample input.yaml file
$ cat apache-samples/custom-sample/input.yaml
# Use this to provide your own Apache webtier configuration as needed; simply define this
# path and put your own custom_mod_wl_apache.conf file under this path.
volumePath: ${WORKDIR}/weblogic-kubernetes-operator/kubernetes/samples/charts/apache-samples/custom-sample
# The VirtualHostName of the Apache HTTP server. It is used to enable custom SSL configuration.
virtualHostName: <WEBLOGIC_HOST>
Install the Apache webtier Helm chart
-
Install the Apache webtier Helm chart to the domain soans namespace with the specified input parameters:
$ cd ${WORKDIR}/weblogic-kubernetes-operator/kubernetes/samples/charts
$ kubectl create namespace apache-webtier
$ helm install apache-webtier --values apache-samples/custom-sample/input.yaml --namespace soans apache-webtier --set image=oracle/apache:12.2.1.3
-
Check the status of the Apache webtier:
$ kubectl get all -n soans | grep apache
Sample output of the status of the apache webtier:
pod/apache-webtier-apache-webtier-65f69dc6bc-zg5pj 1/1 Running 0 22h
service/apache-webtier-apache-webtier NodePort 10.108.29.98 <none> 80:30305/TCP,4433:30443/TCP 22h
deployment.apps/apache-webtier-apache-webtier 1/1 1 1 22h
replicaset.apps/apache-webtier-apache-webtier-65f69dc6bc 1 1 1 22h
Verify domain application URL access
Post the Apache webtier load balancer is up, verify that the domain applications are accessible through the load balancer port 30305/30443. The application URLs for domain of type soa are:
Note: Port 30305 is the LOADBALANCER-Non-SSLPORT and Port 30443 is LOADBALANCER-SSLPORT.
Non-SSL configuration
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/weblogic/ready
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/console
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/em
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/soa-infra
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/soa/composer
http://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-Non-SSLPORT}/integration/worklistapp
SSL configuration
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/weblogic/ready
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/console
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/em
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/soa-infra
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/soa/composer
https://${LOADBALANCER-HOSTNAME}:${LOADBALANCER-SSLPORT}/integration/worklistapp
Uninstall Apache webtier
$ helm delete apache-webtier -n soans