To prepare for Oracle Identity Governance deployment in a Kubernetes environment, complete the following steps:
Preparing the environment for domain creation
a. Creating Kubernetes secrets for the domain and RCU
b. Create a Kubernetes persistent volume and persistent volume claim
As per the Prerequisites a Kubernetes cluster should have already been configured.
Run the following command on the master node to check the cluster and worker nodes are running:
$ kubectl get nodes,pods -n kube-system
The output will look similar to the following:
NAME STATUS ROLES AGE VERSION
node/worker-node1 Ready <none> 17h v1.20.10
node/worker-node2 Ready <none> 17h v1.20.10
node/master-node Ready master 23h v1.20.10
NAME READY STATUS RESTARTS AGE
pod/coredns-66bff467f8-fnhbq 1/1 Running 0 23h
pod/coredns-66bff467f8-xtc8k 1/1 Running 0 23h
pod/etcd-master 1/1 Running 0 21h
pod/kube-apiserver-master-node 1/1 Running 0 21h
pod/kube-controller-manager-master-node 1/1 Running 0 21h
pod/kube-flannel-ds-amd64-lxsfw 1/1 Running 0 17h
pod/kube-flannel-ds-amd64-pqrqr 1/1 Running 0 17h
pod/kube-flannel-ds-amd64-wj5nh 1/1 Running 0 17h
pod/kube-proxy-2kxv2 1/1 Running 0 17h
pod/kube-proxy-82vvj 1/1 Running 0 17h
pod/kube-proxy-nrgw9 1/1 Running 0 23h
pod/kube-scheduler-master 1/1 Running 0 21$
The OIG Kubernetes deployment requires access to an OIG container image. The image can be obtained in the following ways:
The latest prebuilt OIG container image can be downloaded from Oracle Container Registry. This image is prebuilt by Oracle and includes Oracle Identity Governance 12.2.1.4.0 and the latest PSU.
Note: Before using this image you must login to Oracle Container Registry, navigate to Middleware > oig_cpu and accept the license agreement.
Alternatively the same image can also be downloaded from My Oracle Support by referring to the document ID 2723908.1.
You can use this image in the following ways:
You can build your own OIG container image using the WebLogic Image Tool. This is recommended if you need to apply one off patches to a Prebuilt OIG container image. For more information about building your own container image with WebLogic Image Tool, see Create or update image.
You can use an image built with WebLogic Image Tool in the following ways:
Note: This documentation does not tell you how to pull or push the above images into a private container registry, or stage them on the master and worker nodes. Details of this can be found in the Enterprise Deployment Guide.
Oracle Identity Governance domain deployment on Kubernetes leverages the WebLogic Kubernetes Operator infrastructure. For deploying the OIG domains, you need to set up the deployment scripts on the master node as below:
Create a working directory to setup the source code.
$ mkdir <workdir>
For example:
$ mkdir /scratch/OIGK8S
Download the latest OIG deployment scripts from the OIG repository.
$ cd <workdir>
$ git clone https://github.com/oracle/fmw-kubernetes.git --branch release/22.2.1
For example:
$ cd /scratch/OIGK8S
$ git clone https://github.com/oracle/fmw-kubernetes.git --branch release/22.2.1
Set the $WORKDIR environment variable as follows:
$ export WORKDIR=<workdir>/fmw-kubernetes/OracleIdentityGovernance
For example:
$ export WORKDIR=/scratch/OIGK8S/fmw-kubernetes/OracleIdentityGovernance
Run the following command and see if the WebLogic custom resource definition name already exists:
$ kubectl get crd
In the output you should see:
No resources found in default namespace.
If you see the following:
NAME AGE
domains.weblogic.oracle 5d
then run the following command to delete the existing crd:
$ kubectl delete crd domains.weblogic.oracle
customresourcedefinition.apiextensions.k8s.io "domains.weblogic.oracle" deleted
On the master node run the following command to create a namespace for the operator:
$ kubectl create namespace <sample-kubernetes-operator-ns>
For example:
$ kubectl create namespace opns
The output will look similar to the following:
namespace/opns created
Create a service account for the operator in the operator’s namespace by running the following command:
$ kubectl create serviceaccount -n <sample-kubernetes-operator-ns> <sample-kubernetes-operator-sa>
For example:
$ kubectl create serviceaccount -n opns op-sa
The output will look similar to the following:
serviceaccount/op-sa created
Run the following helm command to install and start the operator:
$ cd $WORKDIR
$ helm install weblogic-kubernetes-operator kubernetes/charts/weblogic-operator \
--namespace <sample-kubernetes-operator-ns> \
--set image=ghcr.io/oracle/weblogic-kubernetes-operator:3.3.0 \
--set serviceAccount=<sample-kubernetes-operator-sa> \
--set “enableClusterRoleBinding=true” \
--set "domainNamespaceSelectionStrategy=LabelSelector" \
--set "domainNamespaceLabelSelector=weblogic-operator\=enabled" \
--set "javaLoggingLevel=FINE" --wait
For example:
$ cd $WORKDIR
$ helm install weblogic-kubernetes-operator kubernetes/charts/weblogic-operator \
--namespace opns \
--set image=ghcr.io/oracle/weblogic-kubernetes-operator:3.3.0 \
--set serviceAccount=op-sa \
--set "enableClusterRoleBinding=true" \
--set "domainNamespaceSelectionStrategy=LabelSelector" \
--set "domainNamespaceLabelSelector=weblogic-operator\=enabled" \
--set "javaLoggingLevel=FINE" --wait
The output will look similar to the following:
NAME: weblogic-kubernetes-operator
LAST DEPLOYED: Wed Mar 9 11:51:37 2022
NAMESPACE: opns
STATUS: deployed
REVISION: 1
TEST SUITE: None
Verify that the operator’s pod and services are running by executing the following command:
$ kubectl get all -n <sample-kubernetes-operator-ns>
For example:
$ kubectl get all -n opns
The output will look similar to the following:
NAME READY STATUS RESTARTS AGE
pod/weblogic-operator-676d5cc6f4-rwzxf 2/2 Running 0 59s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/internal-weblogic-operator-svc ClusterIP 10.102.7.232 <none> 8082/TCP 59s
NAME READY UP-TO-DATE AVAILABLE AGE
deployment.apps/weblogic-operator 1/1 1 1 59s
NAME DESIRED CURRENT READY AGE
replicaset.apps/weblogic-operator-676d5cc6f4 1 1 1 59s
Verify the operator pod’s log:
$ kubectl logs -n <sample-kubernetes-operator-ns> -c weblogic-operator deployments/weblogic-operator
For example:
$ kubectl logs -n opns -c weblogic-operator deployments/weblogic-operator
The output will look similar to the following:
{"timestamp":"2022-03-09T11:52:53.167756673Z","thread":23,"fiber":"","namespace":"","domainUID":"","level":"CONFIG","class":"oracle.kubernetes.operator.TuningParametersImpl","method":"update","timeInMillis":1636650293167,"message":"Reloading tuning parameters from Operator's config map","exception":"","code":"","headers":{},"body":""}
{"timestamp":"2022-03-09T11:53:03.170083172Z","thread":30,"fiber":"","namespace":"","domainUID":"","level":"CONFIG","class":"oracle.kubernetes.operator.TuningParametersImpl","method":"update","timeInMillis":1636650303170,"message":"Reloading tuning parameters from Operator's config map","exception":"","code":"","headers":{},"body":""}
{"timestamp":"2022-03-09T11:52:13.172302644Z","thread":29,"fiber":"","namespace":"","domainUID":"","level":"CONFIG","class":"oracle.kubernetes.operator.TuningParametersImpl","method":"update","timeInMillis":1636650313172,"message":"Reloading tuning parameters from Operator's config map","exception":"","code":"","headers":{},"body":""}
Run the following command to create a namespace for the domain:
$ kubectl create namespace <domain_namespace>
For example:
$ kubectl create namespace oigns
The output will look similar to the following:
namespace/oigns created
Run the following command to tag the namespace so the WebLogic Kubernetes Operator can manage it:
$ kubectl label namespaces <domain_namespace> weblogic-operator=enabled
For example:
$ kubectl label namespaces oigns weblogic-operator=enabled
The output will look similar to the following:
namespace/oigns labeled
Run the following command to check the label was created:
$ kubectl describe namespace <domain_namespace>
For example:
$ kubectl describe namespace oigns
The output will look similar to the following:
Name: oigns
Labels: weblogic-operator=enabled
Annotations: <none>
Status: Active
No resource quota.
No LimitRange resource.
In this section you create a secret that stores the credentials for the container registry where the OIG image is stored. This step must be followed if using Oracle Container Registry or your own private registry. If you are not using a container registry and have loaded the images on each of the master and worker nodes, you can skip this step.
Run the following command to create the secret:
kubectl create secret docker-registry "orclcred" --docker-server=<CONTAINER_REGISTRY> \
--docker-username="<USER_NAME>" \
--docker-password=<PASSWORD> --docker-email=<EMAIL_ID> \
--namespace=<domain_namespace>
For example, if using Oracle Container Registry:
kubectl create secret docker-registry "orclcred" --docker-server=container-registry.oracle.com \
--docker-username="user@example.com" \
--docker-password=password --docker-email=user@example.com \
--namespace=oigns
Replace <USER_NAME> and <PASSWORD> with the credentials for the registry with the following caveats:
If using Oracle Container Registry to pull the OIG container image, this is the username and password used to login to Oracle Container Registry. Before you can use this image you must login to Oracle Container Registry, navigate to Middleware > oig_cpu and accept the license agreement.
If using your own container registry to store the OIG container image, this is the username and password (or token) for your container registry.
The output will look similar to the following:
secret/orclcred created
In this section you create the RCU schemas in the Oracle Database.
Before following the steps in this section, make sure that the database and listener are up and running and you can connect to the database via SQL*Plus or other client tool.
If using Oracle Container Registry or your own container registry for your OIG container image, run the following command to create a helper pod to run RCU:
$ kubectl run --image=<image_name-from-registry> --image-pull-policy="IfNotPresent" --overrides='{"apiVersion": "v1", "spec":{"imagePullSecrets": [{"name": "orclcred"}]}}' helper -n <domain_namespace> -- sleep infinity
For example:
$ kubectl run --image=container-registry.oracle.com/middleware/oig_cpu:12.2.1.4-jdk8-ol7-220120.1359 --image-pull-policy="IfNotPresent" --overrides='{"apiVersion": "v1","spec":{"imagePullSecrets": [{"name": "orclcred"}]}}' helper -n oigns -- sleep infinity
If you are not using a container registry and have loaded the image on each of the master and worker nodes, run the following command:
$ kubectl run helper --image <image> -n oigns -- sleep infinity
For example:
$ kubectl run helper --image oracle/oig:12.2.1.4-jdk8-ol7-220120.1359 -n oigns -- sleep infinity
The output will look similar to the following:
pod/helper created
Run the following command to check the pod is running:
$ kubectl get pods -n <domain_namespace>
For example:
$ kubectl get pods -n oigns
The output will look similar to the following:
NAME READY STATUS RESTARTS AGE
helper 1/1 Running 0 3m
Note: If you are pulling the image from a container registry it may take several minutes before the pod has a STATUS of 1\1. While the pod is starting you can check the status of the pod, by running the following command:
$ kubectl describe pod helper -n oigns
Run the following command to start a bash shell in the helper pod:
$ kubectl exec -it helper -n <domain_namespace> -- /bin/bash
For example:
$ kubectl exec -it helper -n oigns -- /bin/bash
This will take you into a bash shell in the running helper pod:
[oracle@helper oracle]$
In the helper bash shell run the following commands to set the environment:
[oracle@helper oracle]$ export DB_HOST=<db_host.domain>
[oracle@helper oracle]$ export DB_PORT=<db_port>
[oracle@helper oracle]$ export DB_SERVICE=<service_name>
[oracle@helper oracle]$ export RCUPREFIX=<rcu_schema_prefix>
[oracle@helper oracle]$ export RCU_SCHEMA_PWD=<rcu_schema_pwd>
[oracle@helper oracle]$ echo -e <db_pwd>"\n"<rcu_schema_pwd> > /tmp/pwd.txt
[oracle@helper oracle]$ cat /tmp/pwd.txt
where:
<db_host.domain> is the database server hostname
<db_port> is the database listener port
<service_name> is the database service name
<rcu_schema_prefix> is the RCU schema prefix you want to set
<rcu_schema_pwd> is the password you want to set for the <rcu_schema_prefix>
<db_pwd> is the SYS password for the database
For example:
[oracle@helper oracle]$ export DB_HOST=mydatabasehost.example.com
[oracle@helper oracle]$ export DB_PORT=1521
[oracle@helper oracle]$ export DB_SERVICE=orcl.example.com
[oracle@helper oracle]$ export RCUPREFIX=OIGK8S
[oracle@helper oracle]$ export RCU_SCHEMA_PWD=<password>
[oracle@helper oracle]$ echo -e <password>"\n"<password> > /tmp/pwd.txt
[oracle@helper oracle]$ cat /tmp/pwd.txt
<password>
<password>
In the helper bash shell run the following commands to create the RCU schemas in the database:
[oracle@helper oracle]$ /u01/oracle/oracle_common/bin/rcu -silent -createRepository -databaseType ORACLE -connectString \
$DB_HOST:$DB_PORT/$DB_SERVICE -dbUser sys -dbRole sysdba -useSamePasswordForAllSchemaUsers true \
-selectDependentsForComponents true -schemaPrefix $RCUPREFIX -component OIM -component MDS -component SOAINFRA -component OPSS \
-f < /tmp/pwd.txt
The output will look similar to the following:
RCU Logfile: /tmp/RCU2022-03-09_17-09_964981565/logs/rcu.log
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Create tablespaces in the repository database
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 10
Executing pre create operations
Percent Complete: 25
Percent Complete: 25
Percent Complete: 26
Percent Complete: 27
Percent Complete: 28
Percent Complete: 28
Percent Complete: 29
Percent Complete: 29
Creating Common Infrastructure Services(STB)
Percent Complete: 36
Percent Complete: 36
Percent Complete: 44
Percent Complete: 44
Percent Complete: 44
Creating Audit Services Append(IAU_APPEND)
Percent Complete: 51
Percent Complete: 51
Percent Complete: 59
Percent Complete: 59
Percent Complete: 59
Creating Audit Services Viewer(IAU_VIEWER)
Percent Complete: 66
Percent Complete: 66
Percent Complete: 67
Percent Complete: 67
Percent Complete: 68
Percent Complete: 68
Creating Metadata Services(MDS)
Percent Complete: 76
Percent Complete: 76
Percent Complete: 76
Percent Complete: 77
Percent Complete: 77
Percent Complete: 78
Percent Complete: 78
Percent Complete: 78
Creating Weblogic Services(WLS)
Percent Complete: 82
Percent Complete: 82
Percent Complete: 83
Percent Complete: 84
Percent Complete: 86
Percent Complete: 88
Percent Complete: 88
Percent Complete: 88
Creating User Messaging Service(UCSUMS)
Percent Complete: 92
Percent Complete: 92
Percent Complete: 95
Percent Complete: 95
Percent Complete: 100
Creating Audit Services(IAU)
Creating Oracle Platform Security Services(OPSS)
Creating SOA Infrastructure(SOAINFRA)
Creating Oracle Identity Manager(OIM)
Executing post create operations
Repository Creation Utility: Create - Completion Summary
Database details:
-----------------------------
Host Name : mydatabasehost.example.com
Port : 1521
Service Name : ORCL.EXAMPLE.COM
Connected As : sys
Prefix for (prefixable) Schema Owners : OIGK8S
RCU Logfile : /tmp/RCU2022-03-09_17-09_964981565/logs/rcu.log
Component schemas created:
-----------------------------
Component Status Logfile
Common Infrastructure Services Success /tmp/RCU2022-03-09_17-09_964981565/logs/stb.log
Oracle Platform Security Services Success /tmp/RCU2022-03-09_17-09_964981565/logs/opss.log
SOA Infrastructure Success /tmp/RCU2022-03-09_17-09_964981565/logs/soainfra.log
Oracle Identity Manager Success /tmp/RCU2022-03-09_17-09_964981565/logs/oim.log
User Messaging Service Success /tmp/RCU2022-03-09_17-09_964981565/logs/ucsums.log
Audit Services Success /tmp/RCU2022-03-09_17-09_964981565/logs/iau.log
Audit Services Append Success /tmp/RCU2022-03-09_17-09_964981565/logs/iau_append.log
Audit Services Viewer Success /tmp/RCU2022-03-09_17-09_964981565/logs/iau_viewer.log
Metadata Services Success /tmp/RCU2022-03-09_17-09_964981565/logs/mds.log
WebLogic Services Success /tmp/RCU2022-03-09_17-09_964981565/logs/wls.log
Repository Creation Utility - Create : Operation Completed
[oracle@helper oracle]$
Run the following command to patch schemas in the database:
This command should be run if you are using an OIG image that contains OIG bundle patches. If using an OIG image without OIG bundle patches, then you can skip this step.
[oracle@helper oracle]$ /u01/oracle/oracle_common/modules/thirdparty/org.apache.ant/1.10.5.0.0/apache-ant-1.10.5/bin/ant \
-f /u01/oracle/idm/server/setup/deploy-files/automation.xml \
run-patched-sql-files \
-logger org.apache.tools.ant.NoBannerLogger \
-logfile /u01/oracle/idm/server/bin/patch_oim_wls.log \
-DoperationsDB.host=$DB_HOST \
-DoperationsDB.port=$DB_PORT \
-DoperationsDB.serviceName=$DB_SERVICE \
-DoperationsDB.user=${RCUPREFIX}_OIM \
-DOIM.DBPassword=$RCU_SCHEMA_PWD \
-Dojdbc=/u01/oracle/oracle_common/modules/oracle.jdbc/ojdbc8.jar
The output will look similar to the following:
Buildfile: /u01/oracle/idm/server/setup/deploy-files/automation.xml
Verify the database was patched successfully by viewing the patch_oim_wls.log:
[oracle@helper oracle]$ cat /u01/oracle/idm/server/bin/patch_oim_wls.log
The output should look similar to below:
...
[sql] Executing resource: /u01/oracle/idm/server/db/oim/oracle/StoredProcedures/OfflineDataPurge/oim_pkg_offline_datapurge_pkg_body.sql
[sql] Executing resource: /u01/oracle/idm/server/db/oim/oracle/Upgrade/oim12cps4/list/oim12cps4_dml_pty_insert_sysprop_RequestJustificationLocale.sql
[sql] Executing resource: /u01/oracle/idm/server/db/oim/oracle/Upgrade/oim12cps4/list/oim12cps4_dml_pty_insert_sysprop_reportee_chain_for_mgr.sql
[sql] 36 of 36 SQL statements executed successfully
BUILD SUCCESSFUL
Total time: 5 second
Exit the helper bash shell by issuing the command exit.
In this section you prepare the environment for the OIG domain creation. This involves the following steps:
a. Creating Kubernetes secrets for the domain and RCU
b. Create a Kubernetes persistent volume and persistent volume claim
Create a Kubernetes secret for the domain using the create-weblogic-credentials script in the same Kubernetes namespace as the domain:
$ cd $WORKDIR/kubernetes/create-weblogic-domain-credentials
$ ./create-weblogic-credentials.sh -u weblogic -p <pwd> -n <domain_namespace> -d <domain_uid> -s <kubernetes_domain_secret>
where:
-u weblogic is the WebLogic username
-p <pwd> is the password for the WebLogic user
-n <domain_namespace> is the domain namespace
-d <domain_uid> is the domain UID to be created. The default is domain1 if not specified
-s <kubernetes_domain_secret> is the name you want to create for the secret for this namespace. The default is to use the domainUID if not specified
For example:
$ cd $WORKDIR/kubernetes/create-weblogic-domain-credentials
$ ./create-weblogic-credentials.sh -u weblogic -p <password> -n oigns -d governancedomain -s oig-domain-credentials
The output will look similar to the following:
secret/oig-domain-credentials created
secret/oig-domain-credentials labeled
The secret oig-domain-credentials has been successfully created in the oigns namespace.
Verify the secret is created using the following command:
$ kubectl get secret <kubernetes_domain_secret> -o yaml -n <domain_namespace>
For example:
$ kubectl get secret oig-domain-credentials -o yaml -n oigns
The output will look similar to the following:
$ kubectl get secret oig-domain-credentials -o yaml -n oigns
apiVersion: v1
data:
password: V2VsY29tZTE=
username: d2VibG9naWM=
kind: Secret
metadata:
creationTimestamp: "2022-03-09T17:47:29Z"
labels:
weblogic.domainName: governancedomain
weblogic.domainUID: governancedomain
name: oig-domain-credentials
namespace: oigns
resourceVersion: "3216738"
uid: c2ec07e0-0135-458d-bceb-c648d2a9ac54
type: Opaque
Create a Kubernetes secret for RCU in the same Kubernetes namespace as the domain, using the create-weblogic-credentials.sh script:
$ cd $WORKDIR/kubernetes/create-rcu-credentials
$ ./create-rcu-credentials.sh -u <rcu_prefix> -p <rcu_schema_pwd> -a sys -q <sys_db_pwd> -d <domain_uid> -n <domain_namespace> -s <kubernetes_rcu_secret>
where:
-u <rcu_prefix> is the name of the RCU schema prefix created previously
-p <rcu_schema_pwd> is the password for the RCU schema prefix
-a <sys_db_user> is the database user with sys dba privilege
-q <sys_db_pwd> is the sys database password
-d <domain_uid> is the domain_uid that you created earlier
-n <domain_namespace> is the domain namespace
-s <kubernetes_rcu_secret> is the name of the rcu secret to create
For example:
$ cd $WORKDIR/kubernetes/create-rcu-credentials
$ ./create-rcu-credentials.sh -u OIGK8S -p <password> -a sys -q <password> -d governancedomain -n oigns -s oig-rcu-credentials
The output will look similar to the following:
secret/oig-rcu-credentials created
secret/oig-rcu-credentials labeled
The secret oig-rcu-credentials has been successfully created in the oigns namespace.
Verify the secret is created using the following command:
$ kubectl get secret <kubernetes_rcu_secret> -o yaml -n <domain_namespace>
For example:
$ kubectl get secret oig-rcu-credentials -o yaml -n oigns
The output will look similar to the following:
apiVersion: v1
data:
password: V2VsY29tZTE=
sys_password: V2VsY29tZTE=
sys_username: c3lz
username: T0lHSzhT
kind: Secret
metadata:
creationTimestamp: "2022-03-09T17:50:50Z"
labels:
weblogic.domainName: governancedomain
weblogic.domainUID: governancedomain
name: oig-rcu-credentials
namespace: oigns
resourceVersion: "3217023"
uid: ce70b91a-fbbc-4839-9616-4cc2c1adeb4f
type: Opaque
As referenced in Prerequisites the nodes in the Kubernetes cluster must have access to a persistent volume such as a Network File System (NFS) mount or a shared file system.
A persistent volume is the same as a disk mount but is inside a container. A Kubernetes persistent volume is an arbitrary name (determined in this case, by Oracle) that is mapped to a physical volume on a disk.
When a container is started, it needs to mount that volume. The physical volume should be on a shared disk accessible by all the Kubernetes worker nodes because it is not known on which worker node the container will be started. In the case of Identity and Access Management, the persistent volume does not get erased when a container stops. This enables persistent configurations.
The example below uses an NFS mounted volume (<persistent_volume>/governancedomainpv). Other volume types can also be used. See the official Kubernetes documentation for Volumes.
Note: The persistent volume directory needs to be accessible to both the master and worker node(s). Make sure this path has full access permissions, and that the folder is empty. In this example /scratch/shared/governancedomainpv is accessible from all nodes via NFS.
Make a backup copy of the create-pv-pvc-inputs.yaml file and create required directories:
$ cd $WORKDIR/kubernetes/create-weblogic-domain-pv-pvc
$ cp create-pv-pvc-inputs.yaml create-pv-pvc-inputs.yaml.orig
$ mkdir output
$ mkdir -p <persistent_volume>/governancedomainpv
$ chmod -R 777 <persistent_volume>/governancedomainpv
For example:
$ cd $WORKDIR/kubernetes/create-weblogic-domain-pv-pvc
$ cp create-pv-pvc-inputs.yaml create-pv-pvc-inputs.yaml.orig
$ mkdir output
$ mkdir -p /scratch/shared/governancedomainpv
$ chmod -R 777 /scratch/shared/governancedomainpv
On the master node run the following command to ensure it is possible to read and write to the persistent volume:
cd <persistent_volume>/governancedomainpv
touch file.txt
ls filemaster.txt
For example:
cd /scratch/shared/governancedomainpv
touch filemaster.txt
ls filemaster.txt
On the first worker node run the following to ensure it is possible to read and write to the persistent volume:
cd /scratch/shared/governancedomainpv
ls filemaster.txt
touch fileworker1.txt
ls fileworker1.txt
Repeat the above for any other worker nodes e.g fileworker2.txt etc. Once proven that it’s possible to read and write from each node to the persistent volume, delete the files created.
Navigate to $WORKDIR/kubernetes/create-weblogic-domain-pv-pvc:
$ cd $WORKDIR/kubernetes/create-weblogic-domain-pv-pvc
and edit the create-pv-pvc-inputs.yaml file and update the following parameters to reflect your settings. Save the file when complete:
baseName: <domain>
domainUID: <domain_uid>
namespace: <domain_namespace>
weblogicDomainStorageType: NFS
weblogicDomainStorageNFSServer: <nfs_server>
weblogicDomainStoragePath: <physical_path_of_persistent_storage>
weblogicDomainStorageSize: 10Gi
For example:
# The base name of the pv and pvc
baseName: domain
# Unique ID identifying a domain.
# If left empty, the generated pv can be shared by multiple domains
# This ID must not contain an underscope ("_"), and must be lowercase and unique across all domains in a Kubernetes cluster.
domainUID: governancedomain
# Name of the namespace for the persistent volume claim
namespace: oigns
# Persistent volume type for the persistent storage.
# The value must be 'HOST_PATH' or 'NFS'.
# If using 'NFS', weblogicDomainStorageNFSServer must be specified.
weblogicDomainStorageType: NFS
# The server name or ip address of the NFS server to use for the persistent storage.
# The following line must be uncomment and customized if weblogicDomainStorateType is NFS:
weblogicDomainStorageNFSServer: mynfsserver
# Physical path of the persistent storage.
# When weblogicDomainStorageType is set to HOST_PATH, this value should be set the to path to the
# domain storage on the Kubernetes host.
# When weblogicDomainStorageType is set to NFS, then weblogicDomainStorageNFSServer should be set
# to the IP address or name of the DNS server, and this value should be set to the exported path
# on that server.
# Note that the path where the domain is mounted in the WebLogic containers is not affected by this
# setting, that is determined when you create your domain.
# The following line must be uncomment and customized:
weblogicDomainStoragePath: /scratch/shared/governancedomainpv
# Reclaim policy of the persistent storage
# The valid values are: 'Retain', 'Delete', and 'Recycle'
weblogicDomainStorageReclaimPolicy: Retain
# Total storage allocated to the persistent storage.
weblogicDomainStorageSize: 10Gi
Execute the create-pv-pvc.sh script to create the PV and PVC configuration files:
$ ./create-pv-pvc.sh -i create-pv-pvc-inputs.yaml -o output
The output will be similar to the following:
Input parameters being used
export version="create-weblogic-sample-domain-pv-pvc-inputs-v1"
export baseName="domain"
export domainUID="governancedomain"
export namespace="oigns"
export weblogicDomainStorageType="NFS"
export weblogicDomainStorageNFSServer="mynfsserver"
export weblogicDomainStoragePath="/scratch/shared/governancedomainpv"
export weblogicDomainStorageReclaimPolicy="Retain"
export weblogicDomainStorageSize="10Gi"
Generating output/pv-pvcs/governancedomain-domain-pv.yaml
Generating output/pv-pvcs/governancedomain-domain-pvc.yaml
The following files were generated:
output/pv-pvcs/governancedomain-domain-pv.yaml
output/pv-pvcs/governancedomain-domain-pvc.yaml
Completed
Run the following to show the files are created:
$ ls output/pv-pvcs
create-pv-pvc-inputs.yaml governancedomain-domain-pv.yaml governancedomain-domain-pvc.yaml
Run the following kubectl command to create the PV and PVC in the domain namespace:
$ kubectl create -f output/pv-pvcs/governancedomain-domain-pv.yaml -n <domain_namespace>
$ kubectl create -f output/pv-pvcs/governancedomain-domain-pvc.yaml -n <domain_namespace>
For example:
$ kubectl create -f output/pv-pvcs/governancedomain-domain-pv.yaml -n oigns
$ kubectl create -f output/pv-pvcs/governancedomain-domain-pvc.yaml -n oigns
The output will look similar to the following:
persistentvolume/governancedomain-domain-pv created
persistentvolumeclaim/governancedomain-domain-pvc created
Run the following commands to verify the PV and PVC were created successfully:
$ kubectl describe pv <pv_name>
$ kubectl describe pvc <pvc_name> -n <domain_namespace>
For example:
$ kubectl describe pv governancedomain-domain-pv
$ kubectl describe pvc governancedomain-domain-pvc -n oigns
The output will look similar to the following:
$ kubectl describe pv governancedomain-domain-pv
Name: governancedomain-domain-pv
Labels: weblogic.domainUID=governancedomain
Annotations: pv.kubernetes.io/bound-by-controller: yes
Finalizers: [kubernetes.io/pv-protection]
StorageClass: governancedomain-domain-storage-class
Status: Bound
Claim: oigns/governancedomain-domain-pvc
Reclaim Policy: Retain
Access Modes: RWX
VolumeMode: Filesystem
Capacity: 10Gi
Node Affinity: <none>
Message:
Source:
Type: NFS (an NFS mount that lasts the lifetime of a pod)
Server: mynfsserver
Path: /scratch/shared/governancedomainpv
ReadOnly: false
Events: <none>
$ kubectl describe pvc governancedomain-domain-pvc -n oigns
Name: governancedomain-domain-pvc
Namespace: oigns
StorageClass: governancedomain-domain-storage-class
Status: Bound
Volume: governancedomain-domain-pv
Labels: weblogic.domainUID=governancedomain
Annotations: pv.kubernetes.io/bind-completed: yes
pv.kubernetes.io/bound-by-controller: yes
Finalizers: [kubernetes.io/pvc-protection]
Capacity: 10Gi
Access Modes: RWX
VolumeMode: Filesystem
Mounted By: <none>
Events: <none>
You are now ready to create the OIG domain as per Create OIG Domains